Brakes2016-07-18T12:49:28+00:00

BG Super DOT 4 Brake Fluid

Formulated to meet or exceed the quality requirements of Domestic and European automobile manufacturers, BG Super DOT 4 goes beyond regular DOT 4 to provide the ultimate in high temperature, high boiling point protection. It surpasses other DOT 4 formulations by increasing flow at low temperatures while protecting against high temperature fade. BG Super DOT 4 meets and exceeds the Federal Motor Vehicle Safety Standard 116, SAE J1704, and ISO 4925. It will provide excellent corrosion prevention, and help maintain precise braking efficiency. Can be used in place of other Super DOT 4 or DOT 4 Plus brake fluids, especially found in the European market.

Part No. 83532: 32 oz. (946 mL) bottle

Part No. 83564: 64 oz. (1892 mL) bottle


BG DOT 4 Brake Fluid Ultra-Dry Flushing Formula

BG DOT 4 Brake Fluid is a premium grade fluid that greatly exceeds the minimum DOT wet boiling point specifications for DOT 4 fluids. This makes BG DOT 4 Brake Fluid an excellent flushing product, ensuring the driest possible fluid is installed in the system, assuring maximum brake component life. BG DOT 4 Brake Fluid inhibitor system provides excellent rust and corrosion protection throughout the braking system.

Part No. 84032: 32 oz. (946 mL) bottle

Part No. 84048: 48 oz. (1.42 L) bottle

Part No. 84064: 64 oz. (1.89 L) bottle

Part No. 8402: 2.5 gal. (9.46 liter) bottle


BG DOT 3 Brake Fluid Ultra-Dry Flushing Formula

BG DOT 3 Brake Fluid is a premium grade fluid for vehicles that require DOT 3 fluid only. This formula exceeds the minimum DOT specifications for DOT 3 fluid and makes an excellent flush because of its dryness and heavy duty additive system. It provides superior rust and corrosion protection throughout the braking system.

Part No. 85032: 32 oz. (946 mL) bottle

Part No. 85048: 48 oz. (1.42 L) bottle

Part No. 85064: 64 oz. (1.89 L) bottle

Part No. 8502: 2.5 gal. (9.46 liter) bottle


BG 403 Non-Chlorinated Brake Cleaner

Safely, effectively, rapidly degreases brake linings, drums, cylinders, springs, disc brake pads and other brake parts. Easy to use—applied without disassembling the brake unit. Contains no chlorofluorocarbons.

Part No. 403: Volume 19.11 fl. oz. (565 mL)


BG 402 Brake & Contact Cleaner

Improves efficiency of braking systems, aids in elimination of brake squeal and chatter. Fast-acting solvents quickly remove brake fluid, grease, oil, moisture and other residue from both drum and disc type assemblies. Cleans and dries distributor parts, spark plugs, magnetos, electrical contacts and relays.

Part No. 402: Volume 12.58 fl. oz. (372 mL)


BG Stop Squeal

Most brake noise is caused by vibrations that occur when pressure is applied. BG Stop Squeal works on the simple principle of impregnating the brake pad with ingredients that reduce sticking between the pad and rotor. When pressure is applied, the vibrations are significantly reduced, thus brake noise is stopped or is markedly less noticeable.

Part No. 860: 1 oz. bottle

Part No. 86032: 32 oz. (946 mL) can